With EPG manufacturer registered in much more than 70 international locations like The united states , Europe , Japan and so on, it has partners amid entire world best enterprises, this sort of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so on. If you are fascinated in any of our items or would like to talk about a likely purchase, make sure you feel totally free to speak to us. EPG has established up a full established of high quality administration method which is presented with innovative inspection and check products. 60W Brushless DC Gear EPTs
Standard Qualities Of EPT
#822660W (DC EPT EPT When Utilized To 24VDC/36VDC/48VDC)
|
Rated EPT (Steady) |
W |
60 (40W/60W) |
|||
|
Rated speed |
r/min |
2500 |
|||
|
Rated torque |
N.m |
.230 |
|||
|
Instantaneous maXiHu (West Lake) Dis.mum torque |
N.m |
.345 |
|||
|
Rotor second of inertia |
J:X10-4kg.m2 |
.082 |
|||
|
Pace control selection |
RPM |
High force two hundred-2500RPM (Minimal pressure two hundred-3000RPM) |
|||
|
Velocity handle range |
On load |
Beneath plusmn1%: condition ~ rated torque, rated pace, rated voltage, area temperature |
|||
|
On voltage |
Underneath plusmn1%: situation rated voltage plusmn10%, rated velocity, rated load, area temperature |
||||
|
On temperature |
Under plusmn1%: Circumstances of ambient temperature ~ forty degC rated voltage, rated load and rated velocity |
||||
|
EPT input |
Rated voltage |
V |
Single period 110V |
Single section 220V |
24VDC(Optional 36VDC/48VDC) |
|
Voltage tolerance variety |
plusmn10% |
||||
|
Frequency |
HZ |
fifty/sixty |
/ |
||
|
Frequency tolerance variety |
plusmn5% |
/ |
|||
|
Rated enter existing |
A |
1.seven |
one. |
3.7 |
|
|
Instantaneous maXiHu (West Lake) Dis.mum enter current |
A |
3.three |
1.nine |
5.6 |
|
Merchandise Description
Round Shaft Sort Optical EPT
#8226Z4BLD60-24GN-30S(4GN5K)-Voltage 24/36/forty eight/a hundred and ten/220
#8226Z4BLD60-24GN-30S(4GN5K) Diagram (ZD StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Drive)
#8226Minimal Voltage Wrie Plughole Corresp-onding EPTal Rationalization
|
plughole |
one |
2 |
three |
four |
|
signal |
U |
W |
Hv |
Hu |
|
plughole |
five |
6 |
seven |
eight |
|
signal |
V |
GND |
Hw |
Vcc |
#8226Higher Voltage Wrie Plughole Corresp-onding EPTal Rationalization
| Corresponding meaning | |||||||||
|
1 |
2 |
three |
four |
5 |
six |
7 |
8 |
nine |
10 |
|
Blue (coarse) |
Yellow (fine) |
Yellow (coarse) |
Eco-friendly (good) |
Inexperienced (coarse) |
Blue (good) |
EPT mesh |
Crimson (wonderful) |
Black (good) |
|
|
W |
Hu |
U |
Hv |
V |
Hw |
Vcc 5V |
GND |
||
#8226PXiHu (West Lake) Dis.Hu (West Lake) Dis.lel Shaft Speed EPT
Z4BLD60-24GN-30S(4GN5K)-Voltage 24/36/forty eight/one hundred ten/220 ()-Velocity Ratio Price
one.Connector:5557-8R/10R(MOLEX) two.The sheath duration of guide line 300mm 3.Round terminal:SRA-21T-4(Minimal ground)
#8226Decimal Gearhead
4GN()XK-10 Velocity Ratio Price, EPTly ten
|
Gearhead Product |
Equipment Ratio |
L Dimension |
|
4GN()K |
three-18 |
32 amp43.five |
|
20~two hundred |
forty three.5 |
#8226EPTr the EPT ratio in the box () inside of the design name
#8226Z4BLD60-24GN-30S(4GN5K) EPT Allowable Torque (Device: N.m)
|
Product |
EPT Pace/Reduction Ratio |
three |
three.6 |
5 |
6 |
seven.5 |
9 |
ten |
12.five |
fifteen |
eighteen |
twenty |
twenty five |
30 |
36 |
50 |
60 |
75 |
ninety |
100 |
120 |
a hundred and fifty |
one hundred eighty |
200 |
|
two hundred~1500RPM |
.72 |
.87 |
one.21 |
1.forty five |
one.eighty one |
two.17 |
two.41 |
three.02 |
3.sixty two |
four.34 |
four.35 |
five.forty four |
6.fifty three |
7.eighty three |
8.00 |
eight.00 |
eight.00 |
eight.00 |
8.00 |
8.00 |
eight.00 |
eight.00 |
eight.00 |
|
|
Z4BLD60-()GN |
2000RPM |
.70 |
.eighty four |
1.sixteen |
one.39 |
1.74 |
2.09 |
two.32 |
2.90 |
three.forty eight |
4.eighteen |
four.sixty four |
five.23 |
six.27 |
7.52 |
eight.00 |
eight.00 |
eight.00 |
8.00 |
eight.00 |
8.00 |
eight.00 |
8.00 |
eight.00 |
|
2500RPM |
.56 |
.67 |
.93 |
one.11 |
1.39 |
1.sixty seven |
one.86 |
two.32 |
two.78 |
3.34 |
3.71 |
4.eighteen |
5.02 |
six.02 |
eight.00 |
8.00 |
eight.00 |
8.00 |
8.00 |
8.00 |
eight.00 |
eight.00 |
eight.00 |
Observe :The() (gray) in the desk signifies that the rotation path is constant with the motor.(The torque unEPTdifferent pace and speed ratio is obtained unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
#8226L Variety Speed EPT
#8226Z4BLD60-24GN-30S(4GN5K) EPT Allowable Torque (Unit: N.m)
|
EPT Velocity/Reduction Ratio |
five |
ten |
15 |
twenty |
thirty |
50 |
one hundred |
200 |
|
200~1500RPM |
1.21 |
two.41 |
three.62 |
four.83 |
6.fifty three |
10.9 |
21.eight |
39.3 |
|
2000RPM |
one.02 |
two.04 |
3.06 |
4.08 |
five.52 |
nine.twenty |
18.4 |
33.3 |
|
2500RPM |
.eighty three |
1.67 |
2.51 |
three.35 |
five.02 |
eight.37 |
16.7 |
30.three |
Notice :All EPT output switch path in form are opposite as motor turn direction.(The torque unEPTdifferent speed and pace ratio is attained unEPTthe ZD stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd.)
Firm Info
FAQ
Q: What’re your main items?
A: We presently create Brushed Dc EPTs, Brushed Dc Gear EPTs, Planetary Dc Gear EPTs, Brushless Dc EPTs, Stepper motors, Ac EPTs and High EPT Planetary Equipment Box and many others. You can check the requirements for earlier mentioned motors on our website and you can e mail us to advise needed motors for every your specification too.
Q: How to choose a ideal motor?
A:If you have motor pictures or drawings to demonstrate us, or you have in depth specs like voltage, velocity, torque, motor size, operating mode of the motor, essential lifetime and sound amount etc, please do not hesitate to enable us know, then we can advocate suited motor per your ask for appropriately.
Q: Do you have a customized support for your stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd motors?
A: Indeed, we can customize for each your ask for for the voltage, pace, torque and shaft dimension/shape. If you require additional wires/cables soldered on the terminal or need to incorporate connectors, or capacitors or EMC we can make it as well.
Q: Do you have an personal style service for motors?
A: Yes, we would like to layout motors individually for our customers, but it may possibly want some mildew deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ing EPT and layout demand.
Q: What’s your guide time?
A: EPTly sEPTing, our normal stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd product will want 15-30days, a bit EPTer for tailored items. But we are really fleXiHu (West Lake) Dis.ble on the direct time, it will count on the distinct orders.
Make sure you speak to us if you have detailed requests, thank you !
